RF I/O SW868

  • Thermoplastic enclosure
  • sWave® wireless technology
  • No wiring and pipe laying required
  • Power supply by Lithium battery
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • The RF I/O may be used in combination with wireless inductive sensor RF IS
  • Connection of external switching contact (potentialfree contact) with gold contacts possible.
  • Delivery does not include protective caps.

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureABS (Acrylnitril-Butadien-Styrol)
Connection4 x Plug-in connector M12 x 1, 4-pole
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Operation cyclesapprox. 12000 telegrams at repetitions/h
Switching frequencymax. 5 Hz
Standby current60 µA
Voltage supplyLithium battery Tadiran SL-760 (replaceable)
SystemLi/SOCl2
Nominal voltage3.6 V
Capacity2.2 Ah
Frequency868.3 MHz (EU, Switzerland)
Transmission power< 25 mW
Data rate66 kbps
Channel bandwidth480 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Battery lifedepending on the switching frequency and number and type of sensors for 1000 transfers/day and one inductive sensor approx. 300 days; for 1000 transfers/day and one mechanical switch approx. 1400 days
Actuating timemin. 80 ms
 
NoteStatus signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
Delivery state: jumper position without status signal
Transmission of battery voltage and switching condition

Ordering details

Type   Material no.  
Type    Material no.   
RF I/O SW868-4E-2,2Ah stock type Standard versions, in stock or available at short notice 1359762
Order now
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.