RF I/O SW868 Vcc extern

  • Thermoplastic enclosure
  • sWave® wireless technology
  • 4 connectors: for the use with wireless sensors, series RF, 3-wire PNP sensors 24 VDC and/or external NO contacts with gold contacts
  • No wiring and pipe laying required
  • External power supply via M12 female plug-in connector
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Note
  • Delivery does not include protective caps.

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -3,
EN 61000-4-2, -20, -4, -5, -6;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureABS (Acrylnitril-Butadien-Styrol)
ConnectionSensors: plug-in connector 4 x M12 x 1, 4-pole
power supply: 1 x M12 female plug-in connector
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Operation cyclesapprox. 12000 telegrams at repetitions/h
Switching frequencymax. 5 Hz
Rated operating voltage range UB18 - 30 VDC Pin 1 and Pin 3 connector M12
Rated operating isolation voltage Ui75 VDC
Uimp500 V
Rated operating current Ie2.5 mA
Voltage drop Ue Ua- 3.5 V with 4 x 50 mA sensor current
Max. load current per sensor connection50 mA
Switching point E1 - E4> 5 VDC
Frequency868.3 MHz (EU, Switzerland)
Transmission power< 25 mW
Data rate66 kbps
Channel bandwidth480 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Actuating timemin. 80 ms
NoteStatus signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
Delivery state: jumper position without status signal

Ordering details

Type   Material no.  
Type    Material no.   
RF I/O SW868-4E-Vcc-ext 1362723
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.