RF 96 ST SW922 Vcc extern

  • Thermoplastic enclosure
  • Mounting details to EN 50047
  • sWave® wireless technology
  • Plug-in connector M12
  • Connection: for the use with wireless sensors, series RF, 3-wire PNP sensors 24 VDC and/or external NO contacts with gold contacts
  • Power supply: 24 VDC
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -3,
EN 61000-4-2, -20, -4, -5, -6;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosureglass-fibre reinforced, shock-proof thermoplastic (PA 66), self-extinguishing UL 94-V0
Tightening torqueM4 mounting screw enclosure: max 1.2 Nm,
M2.5 cover screws: approx. 0.45 Nm
ConnectionPlug-in connector M12 x 1, 4-pole
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Operation cyclesmax. 1440 telegrams/h
Switching frequencymax. 5 Hz
Rated operating voltage range UB10 … 30 VDC Pin 1 and Pin 3
Rated operating isolation voltage Ui75 VDC
Uimp500 V
Rated operating current Ie2.5 mA
Standby current15 µA
Voltage drop Ue Ua-1.5 V
Max. load current100 mA
Switching point E1 E2> 5 VDC
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth520 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Actuating timemin. 80 ms
Approvals Japan: ARIB STD-T108: 204-610002

Ordering details

Type   Material no.  
Type    Material no.   
RF 96 ST SW922 Vcc extern 1255102
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.