RF 96 ST Vcc extern

Thermoplastic enclosure
Mounting details to EN 50047
sWave^® wireless technology (SW868/SW915/SW917/SW922)
External power supply via M12 plug-in connector
Connection: 3-wire PNP sensors 24 VDC and/or external NO contacts with gold contacts
Power supply: 24 VDC
Easy programming of receiver
Output signal can be individually configurated at the receiver
Available with "LBT - Listen before Talk" Software

Applied standards	EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure	thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Tightening torque	M4 enclosure mounting screw: max 1.2 Nm M2.5 cover screws: approx. 0.45 Nm
Degree of protection	IP 67 to IEC/EN 60529
Voltage supply	24 VDC
Connection	Plug-in connector M12 x 1, 4-pole
Ambient temperature	–20 °C … +65 °C
Switching frequency	max. 5 Hz
Rated operating voltage range U_B	10 … 30 VDC Pin 1 and Pin 3 plug-in connector M12
Rated operating isolation voltage U_i	75 VDC
Rated impulse withstand voltage U_imp	0.5 kV
Rated operating current I_e	2.5 mA
Voltage drop U_e - U_a	1.5 V
Load current	max. 100 mA
Switching points	> 5 VDC (E1, E2)
Wireless range	SW868/915/917: max. 450 m outside, max. 40 m inside SW922: max. 150 m outside, max. 20 m inside
Actuating time	min. 80 ms
Wireless approvals	Europe: RED 2014/53/EU USA: FCC Part 15.247: XK5-RF Rx SW915 Canada: IC RSS-210: 5158A-RF Rx SW 915 Mexico: IFT - RCPSTRF17-1886 Brazil: ANATEL 04172-18-06718 Japan: ARIB STD-T108: 204-610002

Ordering details

Type		Material no.
Type		Material no.
RF 96 ST SW868 Vcc extern (Europe, China)		1245018

Type		Material no.
RF 96 ST SW868 Vcc extern 10s status signal LBT (Europe, China)		1337601

Type		Material no.
RF 96 ST SW915 Vcc extern (USA, Canada, Mexico, Australia)		1245020

Type		Material no.
RF 96 ST SW917 Vcc extern (Brazil)		1322433

Type		Material no.
RF 96 ST SW922 Vcc extern LBT (Japan)		1255102