RF GFSI SW2.4-safe

  • Set consisting of:
    Foot switch 1-pedal with protective shield
    and charging device,
    Wireless receiver / RF RxT SW2.4-safe >
    with magnetic base antenna
    and pairing cable

Technical data

RF GFSI SW2.4-safe
Applied standards EN 60947-5-1, EN 61000-6-2, EN 62061, EN 61326-3-1, EN ISO 13849-1, EN 61784-3, EN 300 328, EN 301 489-1/-17, EN 60950-1, EN 50371
Enclosure aluminium die-cast, powder-coated
Degree of protection IP 67 to IEC/EN 60529
Protocol sWave®
Frequency 2.4 - 2.4835 GHz
Transmission power 3.15 mW
Voltage supply lithium ion rechargeable battery
Nominal voltage 3.7 V
Nominal capacity 2.25 Ah
Charging device 7,5 V/800 mA; ODU-connector
Battery life after 300 charging cycles 80 % battery capacity
Safety-relevant data:
EN ISO 13849-1 Performance Level PL d
Category 2
B10d (10 % load) 20 million
TM max. 20 years
MTTFd electronic 216 years
MTTFd 119 years
DC/DCavg 84 %
PFHd 5.28 x 10-7 1/h
nop 378
Transmission interval < 50 ms
Synchronisation after sleep mode max. 8 s
Current consumption active: approx. 35 mA
sniff mode: approx. 12 mA
sleep mode: approx. 1 mA
Ambient temperature charging 0 °C … +40 °C
Ambient temperature –20 °C … +55 °C
Storage and shipping temperature –20 °C … +60 °C
Mechanical life > 1 million operations
Wireless range max. 15 m inside
Wireless approvals Europe: RED 2014/53/EU
USA: FCC-Id. T7V-BC06
Canada: IC 216Q-BC06
Japan: ARIB STD-T66
Approvals TÜV Nord
Technical data
RF RxT SW2.4-safe
see separate data sheet of / RF RxT SW2.4-safe >

Ordering details

Type   Material no.  
Type    Material no.   
RF GFSI 2S SW2.4-safe / RF RxT SW2.4-safe (SET) stock type Standard versions, in stock or available at short notice 1329045
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Accessories

RF CAN Extension Board 4W
  • Extension of RF RxT SW2.4-safe 24 VDC
  • 4 potential-free relay outputs
  • 4 change-over contacts, max. 6 A
  • LEDs for indication of switching state
  • CAN communication
RF SMA antenna socket 0.5 m
  • Suitable for antennae with SMA plug-in connector
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
Power supply 24V DC
  • Push-in terminals