RF Rx EN868-1W 24 VDC

Wireless receiver
Material number: 1186059
(Material number old: 90590007)
  • EnOcean® wireless technology
  • 1 potential-free relay output
  • 1 change-over contact
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Note
  • External antenna always required for optimum wireless range
In stock
Contact

Technical data

Applied standards EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Degree of protection IP 20 to IEC/EN 60529
Frequency 868.3 MHz (Europe) 
Number of channels 1
Mounting DIN rail mounting
Connection terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Inputs 1 wireless channel, max. 10 transmitters per channel
Outputs 1 change-over contact (relay)
Rated operating current/voltage Ie/Ue max. 0.08 A/24 VDC -15 % … +10 %;
output contacts: 2 A/24 VDC
Utilisation category DC-13
Rated impulse withstand voltage Uimp 2.5 kV
Display green LED: operating state,
orange LED: switching conditions
Operation cycles approx. 9000 telegrams with repetitions/h
Degree of pollution 2
Ambient temperature 0 °C … +55 °C
Storage and shipping temperature –25 °C … +85 °C
Note Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Wireless approvals Europe: RED 2014/53/EU
Weight 72 g

Arrangement of receiver and switch antenna


A = Optimum mounting
B = Possible mounting
C = Unsuitable mounting


Accessories

Power supply 24V DC
  • Push-in terminals
RF magnet antenna SMA plug-in connector straight 2.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
  • Suitable for SW868, SW922 and EN868
  • Cable length 2.5 m
RF magnet antenna 2dBi R-SMA plug-in connector straight 2 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
  • Suitable for SW915 and SW917
  • Cable length 2 m
RF SMA antenna socket 0.5 m
  • Suitable for antennae with SMA plug-in connector
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • RF magnet antenna with straight TNC plug-in connector
  • Suitable for SW868 and EN868
  • Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • Suitable for RF antenna 1275629
  • RF SMA antenna socket with straight TNC plug-in connector
  • Cable length 0.5 m
RF SMA antenna extension 3 m
  • Plug on left side: straight SMA plug
  • Socket on right side: straight SMA socket
RF SMA antenna extension 5 m
  • Plug on left side: straight SMA plug
  • Socket on right side: straight SMA socket
RF High gain antenna 868MHz
  • RF High gain antenna suitable for mast mounting up to max. 41 mm diametre
  • 3.5 dBi gain
  • Internally grounded as lightning protection
RF SMA N antenna extension 5 m
  • RF SMA N antenna extension cable with straight SMA plug-in connector
  • For RF High gain antenna
  • Cable length 5 m
  • Plug on left side: straight SMA Crimp plug
  • Plug on right side: straight N-type Crimp plug
RF SMA N antenna extension 10 m
  • RF SMA N antenna extension cable with straight SMA plug-in connector
  • For RF High gain antenna
  • Cable length 10 m
  • Plug on left side: straight SMA Crimp plug
  • Plug on right side: straight N-type Crimp plug
Mounting bracket for high gain antenna
  • Mounting bracket for wall mounting
  • Distance to wall approx. 17 cm
  • Welded aluminium