RF Rx SW868-4S 24VDC

Wireless receiver
Material number: 1357703
  • sWave® wireless technology
  • 4 potential-free relay outputs
  • 4 NO contacts, max. 3 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Note
  • External antenna always required for optimum wireless range
In stock
Contact

Technical data

Applied standards EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-20, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Degree of protection IP 20 to IEC/EN 60529
Frequency 868.3 MHz (Europe)
Number of channels 4
Mounting DIN rail mounting
Connection screw connection terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
Inputs 4 wireless channels, max. 40 transmitters
Outputs 4 NO contacts (relay)
Rated operating current/voltage Ie/Ue max. 0.1 A/24 VDC -15 % … +10 %;
output contacts: 3 A/250 VAC; 3 A/24 VDC
Utilisation category AC-15; DC-13
Rated operating isolation voltage Ui 250 VAC
Rated impulse withstand voltage Uimp 2.5 kV
Display green LED: ready for operation,
orange LED: signalling of switching state
Operation cycles approx. 12000 telegrams with repetitions/h
Degree of pollution 2
Ambient temperature 0 °C … +55 °C
Storage and shipping temperature –25 °C … +85 °C
Note Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry. Switching contacts are not suitable for capacitive loads.
Wireless approvals Europe: RED 2014/53/EU