RF Rx SW915-1W 24 VAC/DC

Wireless receiver
Material number: 1190428
(Material number old: 90590024)
  • sWave® wireless technology
  • 1 potential-free relay output
  • 1 change-over contact, max. 6 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA reverse plug-in connector for external antenna
Note
  • External antenna always required for optimum wireless range
In stock
Contact

Technical data

Applied standards EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Degree of protection IP 20 to IEC/EN 60529
Frequency 915 MHz (USA, Canada, Mexico, Australia)
Number of channels 1
Mounting DIN rail mounting
Connection terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Inputs 1 wireless channel, max. 10 transmitters per channel
Outputs 1 change-over contact (relay)
Rated operating current/voltage Ie/Ue max. 0.03 A/24 VDC -15 % … +10 %;
max. 0.07 A/24 VAC -15 % … +10 %;
output contacts: 6 A/250 VAC; 2 A/24 VDC
Utilisation category AC-15; DC-13
Rated insulation voltage Ui 250 VAC
Rated impulse withstand voltage Uimp 2.5 kV
Display green LED: operating state,
orange LED: switching conditions
Operation cycles max. 12000 telegrams with repetitions/h
Degree of pollution 2
Ambient temperature 0 °C … +55 °C
Storage and shipping temperature –25 °C … +85 °C
Note Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Wireless approvals USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Weight 66 g

Arrangement of receiver and switch antenna


A = Optimum mounting
B = Possible mounting
C = Unsuitable mounting


Accessories

RF magnet antenna 5dBi R-SMA plug-in connector straight 3.6 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
  • Suitable for SW915 and SW917
  • Cable length 3.6 m
RF magnet antenna 2dBi R-SMA plug-in connector straight 2 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
  • Suitable for SW915 and SW917
  • Cable length 2 m
RF R-SMA antenna extension 3 m
  • Suitable for sWave® wireless technology
  • Cable length 3 m
  • Plug on left side: straight R-SMA plug
  • Socket on right side: straight R-SMA socket
RF R-SMA antenna extension 5 m
  • Suitable for sWave® wireless technology
  • Cable length 5 m
  • Plug on left side: straight R-SMA plug
  • Socket on right side: straight R-SMA socket
Power supply 24V DC
  • Stabilised and adjustable output voltage
  • DC OK signalling via LEDs
  • Parallel connection option
  • Push-in terminals
  • Panel installation on mounting rails