RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
Applied standards | EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2, ANSI/EIA/TIA-232-F-1997 |
---|---|
Degree of protection | IP 20 to IEC/EN 60529 |
Frequency | 868.3 MHz (Europe) |
Number of channels | 2 |
Mounting | DIN rail mounting |
Connection | terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in |
Inputs | 2 wireless channels, max. 10 transmitters per channel |
Outputs | 2 change-over contacts (relays), RS 232 interface |
Rated operating current/voltage Ie/Ue | max. 0.1 A/24 VDC -15 % … +10 %; max. 0.25 A/24 VAC -15 % … +10 %; output contacts: 6 A/250 VAC; 2 A/24 VDC |
Utilisation category | AC-15; DC-13 |
Rated operating isolation voltage Ui | 250 VAC |
Rated impulse withstand voltage Uimp | 2.5 kV |
Display | green LED: ready for operation, orange LEDs: signalling of switching state and baud rate setting |
Operation cycles | approx. 9000 telegrams with repetitions/h |
Degree of pollution | 2 |
Ambient temperature | 0 °C … +55 °C |
Storage and shipping temperature | –25 °C … +85 °C |
Interface | RS232 |
Baudrate | 9600 Bd … 57600 Bd |
Data bits | 8 |
Stop bit | 1 |
Parity | None |
Flow control | None |
Note | Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry. |
Wireless approvals | Europe: RED 2014/53/EU |
RF Rx EN868-2W-s-RS232 24 VAC/DC (Europe, China) | stock type Standard versions, in stock or available at short notice | 1189512 | |