RF 98 H EN868

Wireless position switch
Material number: 1189678
(Material number old: 9109131101)
  • Metal enclosure
  • Design to EN 50041
  • EnOcean® wireless technology
  • No power supply, no wiring and pipe laying required
  • Easy programming of receiver
  • Multi-network capable
  • Output signal can be individually configurated at the receiver
  • Actuator: Roller lever H
  • Actuating speed max. 0.5 m/s with a vertical actuating angle of 30°
  • Actuation parallel to switch from right
  • Wear-resistant plastic roller
  • Actuator can be repositioned by 4 x 90°
Note
  • Actuation from the left should be avoided since this reduces the mechanical life of the position switch.
Contact

Technical data

Applied standards EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-20, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure aluminium die-cast, powder-coated
Cover aluminium die-cast, powder-coated
Degree of protection IP 67 to IEC/EN 60529
Protocol EnOcean®
Frequency 868.3 MHz (Europe)
Transmission power < 25 mW
Data rate 120 kbps
Channel bandwidth 530 kHz
Voltage supply electrodynamic energy generator
Ambient temperature –20 °C … +65 °C
Operation cycles approx. 9000 telegrams with repetitions/h
Wireless range max. 200 m outside,
max. 20 m inside
Mechanical life > 1 million operations
Actuating time min. 80 ms
Note no status signal available
Wireless approvals Europe: RED 2014/53/EU