RF 95 WH EN868

Wireless position switch
Material number: 1182320
(Material number old: 95914001)
  • Thermoplastic enclosure
  • Design to EN 50047
  • EnOcean® wireless technology
  • No power supply, no wiring and pipe laying required
  • Easy programming of receiver
  • Multi-network capable
  • Output signal can be individually configurated at the receiver
  • Actuator: Roller lever with collar WH
  • Actuator type E to EN 50047
  • Actuating speed max. 0.5 m/s with a vertical actuating angle
    of α = 40° and β = 25°
  • Watertight collar for protection against penetration of dirt
  • Wear-resistant plastic roller
  • Actuator can be repositioned by 4 x 90°
Note
  • With metal roller available on request
Contact

Technical data

Applied standards EN 60947-5-1, EN 61000-2, EN 61000-3, EN 301 489-1, EN 301 489-3, EN 300 220-2
Enclosure thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Cover thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Tightening torque enclosure mounting screws: 1.2 … 1.3 Nm
cover screws: 0.5 … 0.6 Nm
Degree of protection IP 67 to IEC/EN 60529
Protocol EnOcean®
Frequency 868.3 MHz (Europe) 
Transmission power < 25 mW
Data rate 120 kbps
Channel bandwidth 530 kHz
Voltage supply Electrodynamic energy generator
Ambient temperature –20 °C … +65 °C
Operation cycles approx. 9000 telegrams with repetitions/h
Wireless range max. 200 m outside,
max. 20 m inside
Mechanical life > 1 million operations
Actuating time min. 80 ms
Wireless approvals Europe: RED 2014/53/EU
Note no status signal available
Weight 90 g

Actuating angles

α - Actuating angle from right of switch axis
β - Actuating angle from left of switch axis as shown in picture


Accessories

Wireless receiver
RF Rx EN868-TCP/IP V2
  • EnOcean® wireless technology
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • Webserver based Setup
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of operating state
  • SMA plug-in connector for external antenna
Wireless receiver
RF RxT EN868-USB
  • Thermoplastic enclosure
  • EnOcean® wireless technology
  • USB 2.0 transmitter and receiver unit
  • Multi-network capable
  • Power supply via USB interface
  • Support of up to 128 actors and an indefinite number of transmitters
Wireless receiver
RF Rx EN868-NPN 24 VDC
  • EnOcean® wireless technology
  • 1-channel: semiconductor output
  • NPN output
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Wireless receiver
RF Rx EN868-PNP 24 VDC
  • EnOcean® wireless technology
  • 1-channel: semiconductor output
  • PNP output
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Wireless receiver
RF Rx EN868-2W 24 VAC/DC
  • EnOcean® wireless technology
  • 2 potential-free relay outputs
  • 2 change-over contacts, max. 6 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Wireless receiver
RF Rx EN868-2W-RS232 24 VAC/DC
  • EnOcean® wireless technology
  • 2 potential-free relay outputs
  • 2 change-over contacts, max. 6 A
  • RS 232 interface
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Wireless receiver
RF Rx EN868-2W-s-RS232 24 VAC/DC
  • EnOcean® wireless technology
  • 2 potential-free relay outputs
  • 2 change-over contacts, max. 6 A
  • RS 232 interface
  • Version with Power-down function
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Wireless receiver
RF Rx EN868-4W 24 VAC/DC
  • EnOcean® wireless technology
  • 4 potential-free relay outputs
  • 4 change-over contacts, max. 6 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Power supply 24V DC
  • Push-in terminals
RF magnet antenna SMA plug-in connector straight 2.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
  • Suitable for SW868, SW922 and EN868
  • Cable length 2.5 m
RF magnet antenna 2dBi SMA plug-in connector straight 2 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
  • Suitable for SW868, SW922 and EN868
  • Cable length 2 m
RF SMA antenna socket 0.5 m
  • Suitable for antennae with SMA plug-in connector
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • RF magnet antenna with straight TNC plug-in connector
  • Suitable for SW868 and EN868
  • Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • Suitable for RF antenna 1275629
  • RF SMA antenna socket with straight TNC plug-in connector
  • Cable length 0.5 m
RF SMA antenna extension 3 m
  • Plug on left side: straight SMA plug
  • Socket on right side: straight SMA socket
RF SMA antenna extension 5 m
  • Plug on left side: straight SMA plug
  • Socket on right side: straight SMA socket
RF High gain antenna 868MHz
  • RF High gain antenna suitable for mast mounting up to max. 41 mm diametre
  • 3.5 dBi gain
  • Internally grounded as lightning protection
RF SMA N antenna extension 5 m
  • RF SMA N antenna extension cable with straight SMA plug-in connector
  • For RF High gain antenna
  • Cable length 5 m
  • Plug on left side: straight SMA Crimp plug
  • Plug on right side: straight N-type Crimp plug
RF SMA N antenna extension 10 m
  • RF SMA N antenna extension cable with straight SMA plug-in connector
  • For RF High gain antenna
  • Cable length 10 m
  • Plug on left side: straight SMA Crimp plug
  • Plug on right side: straight N-type Crimp plug
Mounting bracket for high gain antenna
  • Mounting bracket for wall mounting
  • Distance to wall approx. 17 cm
  • Welded aluminium