RF RC M30 SW868 NIRO

Wireless magnetic sensors
Material number: 1363715
  • Stainless steel enclosure
  • sWave® wireless technology
  • Power supply by Lithium battery
  • No wiring and pipe laying required
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • 2 mounting nuts are included in delivery
  • The actuator is not included in the delivery of the switches
Contact

Technical data

Applied standardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureStainless steel 1.4539
Type of installationflush, in not ferromagnetic material
Tightening torqueMounting nut: max. 75 Nm
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–25 °C … +65 °C
Switching systemReed contact
Switching distancesM 100: sn = 15 mm;
M 30 Niro: sn = 30 mm
Hysteresisapprox. 1 mm
Operation cyclesapprox. 12000 telegrams with repetitions/h
Voltage supplyLithium battery CR 2032 (replaceable)
Current absorptionwithout transmissions: approx. 1 μA
Nominal capacity230 mAh
Frequency868.3 MHz (EU, Switzerland)
Transmission power< 25 mW
Data rate66 kbps
Channel bandwidth480 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Mechanical life> 1 million operations
Battery lifeapprox. 10 years unused, approx. 6 years with 1 actuation per min.
Actuating timemin. 80 ms
Notestatus signal configurable ex works; transmission of battery voltage
Wireless approvalsEU: RED 2014/53/EU