RF RC 10 SW915

Wireless magnetic sensors
Material number: 1271511
  • Thermoplastic enclosure
  • sWave® wireless technology
  • No wiring and pipe laying required
  • Power supply by Lithium battery
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Note
  • The actuator is not included in the delivery of the switches
Contact

Technical data

Applied standardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosureglass-fibre reinforced, shock-proof thermoplastic, self-extinguishing UL 94 V-0
Tightening torqueenclosure mounting screws: 0.5 … 0.6 Nm
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Switching systemreed contacts
Switching distancessn = 10 mm
Hysteresisapprox. 1 mm
Operation cyclesapprox. 12000 telegrams with repetitions/h
Voltage supplyLithium battery CR 2032 (replaceable)
Nominal capacity230 mAh
Frequency915 MHz (USA, Canada and Mexico)
Transmission power< 25 mW
Data rate66 kbps
Channel bandwidth550 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Mechanical life> 1 million operations
Battery life> 800 000 operations
Actuating timemin. 80 ms
Mountingactuator: min. 8 mm distance to ferromagnetic material
Noteno status signal available;
actuator required as accessory
Wireless approvalsUSA: FCC Part 15.247: XK5-RF Rx SW915;
Canada: IC RSS-210: 5158A-RF Rx SW 915;
Mexico: IFT - RCPSTRF17-1886