• Wireless remote control
  • High mechanical stability
  • Wireless signal transmission per steute wireless low energy
  • Power supply via 3 commercially available batteries (AA)
  • Keypad with different functions
  • Ergonomic design
  • Easy-to-clean
  • Additional push-buttons
  • LEDs
  • Special labels
  • Different RAL colours
  • Available on request

Technical data

Applied standardsIEC 60601-1; ANSI/AAMI ES60601-1; IEC 60529
Enclosureshock-proof thermoplastic, RAL 7035
Actuatorcustomised keypad
Degree of protectionIP X5 to IEC/EN 60529
Switching elementskeypad
Switching systemNO contact
Mechanical life> 1 million operations
Voltage supply3 commercially available batteries, Typ AA
Wireless range10 m (typical)
HF data rate1 Mbps
Interface data rate115.2 kBd (UART)
Output power3 dBm - 7 dBm
Input sensitivity-93 dBm
Antennainternal ceramic antenna
Radio technology
Frequency2.4 - 2.4835 GHz
Channel bandwidth2 MHz
Modulation principleGFSK, adaptive frequency hopping of 40 channels
Europe EN 300 328; EN 62479; EN 301 489-1; EN 62368-1
USA FCC, Title 47 CFR, Part 15
CanadaIC RSS-247, Issue 1
Japan ARIB STD-16


Since this is a class-2 equipment, the receiver can only be validated together with the complete system of the customer. Thus the assessment of conformity takes place at the customer. At the request of the customer steute can provide a CE mark with the 4-digit number of the customer's notified body.

Application of a CE certified switch conforming to the Medical Device Directive still requires proof of the conformity of the complete system according to the Medical Device Directive (Directive 93/42/EEC) by the person responsible for launching it on the market! In spite of careful manufacturing and testing, 100 % functional safety cannot be guaranteed at any time (e.g. in case of failure, a switching contact does not switch off). These remaining risks must be considered when evaluating the complete system.