HS 98 R 0-10 VDC IP66 Extreme

Position switch Extreme
Material number: on request
  • With analogue output
  • High degree of protection IP 66 / IP 67
  • Metal enclosure
  • Design to EN 50041
  • Wiring compartment
  • Output value: 0 … 10 VDC
  • Actuator: Roller plunger R
  • Actuator type C to EN 50041
  • Actuating speed max. 0.25 m/s with a vertical actuating angle of 30°
  • Actuator can be repositioned by 4 x 90°
Contact

Technical data

Applied standards EN 60947-5-2, EN 60947-5-7
Enclosure aluminium, corrosion-resistant, powder-coated, anthracite grey, similar to RAL 7016
Cover stainless steel 1.4401, powder-coated, signal yellow, similar to RAL 1003
Degree of protection IP 66/67 to IEC/EN 60529
Switching system Hall sensor with analogue output
Linearity 2 %
Connection Cage clamps
Cable cross-section max. 0.08 … 2.5 mm², AWG 28 … 12
Cable entry 1 x M20 x 1.5
Over temperature protection monitoring via μ controller + NTC
Rated operating voltage Ue 24 VDC
Rated operating voltage range UB 18 … 30 VDC
Rated operating current Ie ≤ 25 mA
Rated output voltage Q1: 0 … 10 V; max. 10.2 V
Rated output current Q2: ≤ 100 mA short-circuit protected
Voltage drop at Ie 2 V
Working resistance ≥ 1 kΩ
Attendance delay tv < 500 ms
Short-circuit protection internal fuse 0.375 mA F
Ambient temperature –20 °C … +60 °C
Mechanical life > 1 million operations

Downloads

Contact diagram

Contacts

Output signal

Example "Setting of output"