ES 95 TK 1Ö/1S IP66 Niro Extreme

Position switch Extreme
Material number: 1248248
  • Version with higher degree of protection IP 66: From a distance of 2.5 to 3.0 m, the devices are treated with splashing water from different directions at 100 l per minute. The jet diametre is 12.5 mm, test duration is 1 min/m surface for at least 3 min.
  • Screws and plunger made of stainless steel
  • Salt-mist proof
  • Thermoplastic enclosure
  • Design to EN 50047
  • Horizontally slotted mounting holes
  • Double insulated
  • Slow action, change-over contact with double break
  • Good resistance to oil and petroleum spirit
  • Actuator: Spring rod with plastic tip TK
  • Wear-resistant plastic tip
  • Spring rod can be actuated from any direction
  • Attention: Please state required international approvals with your order!
  • 1 cable gland M20x1.5 - IP 66 included in delivery
In stock

Technical data

Applied standards EN 60947-5-1, EN ISO 14119
Enclosure thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Tightening torque enclosure mounting screws: 1.2 … 1.3 Nm
cover screws: 0.5 … 0.6 Nm
Degree of protection IP 66 to IEC/EN 60529
Contact material silver
Switching system slow action
Switching elements 1 NC/1 NO contact, type Zb
Connection screw connection terminals
Cable cross-section max. 1.5 mm² (incl. conductor ferrules)
Cable entry 1 x M20 x 1.5 (incl. 1 cable gland)
Clamping range 7 … 10 mm
Rated impulse withstand voltage Uimp 4 kV
Rated insulation voltage Ui 400 V
Conventional thermal current Ithe 6 A
Utilisation category AC-15; DC-13
Rated operating current/voltage Ie/Ue 6 A/400 VAC; 0.25 A/230 VDC; 4 A/24 VDC
Short-circuit protection 6 A gG/gN fuse
Mechanical life > 1 million operations
Operation cycles max. 1800/h
Ambient temperature –20 °C … +80 °C
Contact opening max. 2 x 3.5 mm
Weight 102 g

Contact diagram

Switching diagram