RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
IS M8 Extreme
- Cold-resistant down to -40 °C or heat-resistant up to +120 °C
- High degree of protection IP 68
- Stainless steel enclosure
- Flush mounting
- Long life, no mechanical wear
- Suitable for the food processing industry
- Insensitive to soiling
- With LED
- M8 x 1 thread
- With pre-wired cable
- Attention: Please state required international approvals with your order!
Technical data
| Applied standards | EN 60947-5-2 |
|---|---|
| Enclosure | stainless steel 1.4305 |
| Front cap | POM |
| Degree of protection | IP 68 to IEC/EN 60529 |
| Connection | cable PUR |
| Cable diameter | 3.6 mm |
| Cable cross-section | 3 x 0.14 mm² |
| Switching elements | 1 NO contact, PNP, 3-wire |
| Rated switching distance sn | 2 mm |
| Correction factors | Steel (Fe360) = 1; Stainless steel approx. 0.7; Brass approx. 0.5; Aluminium approx. 0.4; Copper approx. 0.4 |
| Rated operating voltage range UB | 6 … 30 VDC |
| Residual ripple | ≤ 10 % |
| Switching current | max. 0.2 A |
| Voltage drop at Ie | max. 1.8 V |
| Current absorption | < 12 mA at 24 VDC |
| Hysteresis | approx. 10 % |
| Switching frequency | 2000 Hz |
| Repeatability | ≤ 3 % |
| Protection circuit | Inductive interference protection, protection against polarity reversal, short-circuit and overload proof |
| Ambient temperature | –40 °C … +50 °C or 0 °C … +120 °C |
Ordering details
| IS M8b 2BBBCB PNP NO 2m Extreme | stock type Standard versions, in stock or available at short notice | 1202087 | |
| IS M8b 2CBBCB PNP NO 2m Extreme | stock type Standard versions, in stock or available at short notice | 1202090 | |