Ex RF 95 WH/90° EN868

  • Ex zone 1 and 21
  • Thermoplastic enclosure
  • Horizontally slotted mounting holes
  • Mounting details to EN 50047
  • Output signal can be individually configurated at the receiver
  • EnOcean® wireless technology
  • No power supply, no wiring and pipe laying required
  • Multi-network capable
  • Easy programming of receiver

Technical data

Applied standards EN 60947-5-1, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2, EN 60079-0, EN 60079-11
Enclosure thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Cover thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Degree of protection IP 65 to IEC/EN 60529
Protocol EnOcean®
Frequency 868.3 MHz (Europe)
Transmission power < 25 mW
Data rate 120 kbps
Channel bandwidth 530 kHz
Voltage supply Electrodynamic energy generator
Ambient temperature –20 °C … +60 °C
Operation cycles approx. 9000 telegrams with repetitions/h
Wireless range max. 300 m outside,
max. 30 m inside
Mechanical life > 1 million operations
Actuating time min. 80 ms
Impact energy max. 7 J
Note no status signal available
Ex marking II 2G Ex ib IIC T6 Gb
II 2D Ex ib IIIC T80 °C Db
IECEx Ex ib IIC T6 Gb
Ex ib IIIC T80 °C Db
Approvals BVS 08 ATEX E 111
IECEx BVS 08.0048

Ordering details

Type   Material no.  
Type    Material no.   
Ex RF 95 WH/90° EN868 - 3.2 m nylon pull-wire with rubber ball (Europe, China) stock type Standard versions, in stock or available at short notice 1182208
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Accessories

Wireless receiver
RF Rx EN868-TCP/IP V2
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • Webserver based Setup
  • LEDs for indication of operating state
  • SMA plug-in connector for external antenna
  • EnOcean® wireless technology
  • Transmitter/receiver assignment by teaching mode
Wireless receiver
RF RxT EN868-USB
  • Multi-network capable
  • Support of up to 128 actors and an indefinite number of transmitters
  • USB 2.0 transmitter and receiver unit
  • Power supply via USB interface
  • Thermoplastic enclosure
  • EnOcean® wireless technology
Wireless receiver
RF Rx EN868-NPN 24 VDC
  • NPN output
  • 1-channel: semiconductor output
  • SMA plug-in connector for external antenna
  • EnOcean® wireless technology
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
Wireless receiver
RF Rx EN868-PNP 24 VDC
  • PNP output
  • 1-channel: semiconductor output
  • SMA plug-in connector for external antenna
  • EnOcean® wireless technology
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
Wireless receiver
RF Rx EN868-2W 24 VAC/DC
  • 2 change-over contacts, max. 6 A
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • EnOcean® wireless technology
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
Wireless receiver
RF Rx EN868-2W-RS232 24 VAC/DC
  • 2 change-over contacts, max. 6 A
  • RS 232 interface
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • EnOcean® wireless technology
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
Wireless receiver
RF Rx EN868-2W-s-RS232 24 VAC/DC
  • 2 change-over contacts, max. 6 A
  • Version with Power-down function
  • RS 232 interface
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • EnOcean® wireless technology
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
Wireless receiver
RF Rx EN868-4W 24 VAC/DC
  • 4 change-over contacts, max. 6 A
  • SMA plug-in connector for external antenna
  • 4 potential-free relay outputs
  • EnOcean® wireless technology
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
Power supply 24V DC
  • Push-in terminals
RF magnet antenna SMA plug-in connector straight 2.5 m
  • Ordering unit: 1 piece
  • Cable length 2.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
  • Suitable for SW868, SW922 and EN868
RF SMA antenna socket 0.5 m
  • Ordering unit: 1 piece
  • Suitable for antennae with SMA plug-in connector
  • Cable length 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • Ordering unit: 1 piece
  • Cable length 3.6 m
  • RF magnet antenna with straight TNC plug-in connector
  • Suitable for SW868 and EN868
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • Ordering unit: 1 piece
  • Cable length 0.5 m
  • RF SMA antenna socket with straight TNC plug-in connector
  • Suitable for RF antenna 1275629
RF SMA antenna extension 3 m
  • Socket on right side: straight SMA socket
  • Plug on left side: straight SMA plug
RF SMA antenna extension 5 m
  • Socket on right side: straight SMA socket
  • Plug on left side: straight SMA plug
RF High gain antenna 868MHz
  • Internally grounded as lightning protection
  • Ordering unit: 1 piece
  • RF High gain antenna suitable for mast mounting up to max. 41 mm diametre
  • 3.5 dBi gain
RF SMA N antenna extension 5 m
  • Plug on left side: straight SMA Crimp plug
  • Plug on right side: straight N-type Crimp plug
  • Cable length 5 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
RF SMA N antenna extension 10 m
  • Plug on left side: straight SMA Crimp plug
  • Plug on right side: straight N-type Crimp plug
  • Cable length 10 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
Mounting bracket for high gain antenna
  • Mounting bracket for wall mounting
  • Distance to wall approx. 17 cm
  • Welded aluminium