Ex RC 2580 1W-B-Niro-2m

Ex magnetic sensor
Material number: 1190152
(Material number old: 22533202)
  • Ex zone 1 and 21
  • Stainless steel enclosure
  • Cold-resistant down to -40 °C
  • All side actuation
  • With pre-wired cable
  • With mounting thread M16 x 1.5 for cable protection system
  • N.B.: Please state required international approvals with your order!
  • The Ex RC 2580 B (with mounting thread) has "double reinforced insulation". These devices do not require earthing.
  • The actuator is not included in the delivery of the switches

Technical data

Applied standardsEN 60947-5-2; EN 60079-0;
EN 60079-18
EnclosureStainless steel 1.4571
Degree of protectionIP 67 (EN 60079-0 + IEC/EN 60529) or
IP 69 (IEC/EN 60529) / IP 69K (ISO 20653)
Switching systemreed contacts
Switching elements1 change-over contact
Connectionpre-wired cable H05VV-F
Cable cross-section3 x 0.75 mm²
Cable length2 m
Switching voltage250 VAC
Switching currentmax. 1 A
Short-circuit current Ikmax. 2 A
Switching capacitymax. 50 W
Utilisation categoryAC-12; DC-12
Bounce duration0,3 … 0,6 ms
Ambient temperature–40 °C … +70 °C
Mechanical life> 1 million operations
Electrical life106 … 109 operations
Vibration resistance10 … 50 g
Impact energymax. 7 J
Ex marking II 2G Ex mb IIC T6 Gb,
II 2D Ex mb IIIC T80 °C Db
IECEx Ex mb IIC T6 Gb
Ex mb IIIC T80 °C Db
ApprovalsDMT 01 ATEX E 058 X
IECEx BVS 07.0007 X
Weight396 g

Contact diagram

Axial misalignment

Directive for the protection of reed contacts


Type   Material no.  
Type    Material no.   
Ex M 2580-Niro stock type Standard versions, in stock or available at short notice 1189176