RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
Ex 14 AZ
- Ex zone 1 and 21
- Thermoplastic enclosure
- Compact design
- Double insulated
- Slow action
, 1 NC contact - With pre-wired cable
- Version with cable entry on side available on request
- Special version only for dust Ex zone 22 available
- Attention: Please state required international approvals with your order!
Note
- The actuator is not included in the delivery of the switches
Technical data
| Applied standards | EN 60079-0, EN 60079-1, EN 60079-31, EN 60947-5-1, EN ISO 13849-1, EN ISO 14119, EN 81-1, EN 81-2, EN 81-20, EN 81-50 |
|---|---|
| Enclosure | thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0 |
| Actuator | stainless steel 1.4301 |
| Switch type | type 2 |
| Coding level | low coding |
| Tightening torque | enclosure mounting screws: max. 1.5 Nm |
| Degree of protection | IP 65 to IEC/EN 60529 |
| B10d (10 % load) | 2 million |
| TM | max. 20 years |
| Contact material | silver |
| Switching system | slow action, positive break NC contacts |
| Switching elements | 1 NC contact |
| Connection | pre-wired cable H03VV-F |
| Cable cross-section | 2 x 0.75 mm² |
| Cable length | 1.5; 3; 5; 6 or 10 m |
| Rated impulse withstand voltage Uimp | 4 kV |
| Rated insulation voltage Ui | 250 V |
| Conventional thermal current Ithe | 2 A |
| Rated operating current/voltage Ie/Ue | 2 A/230 VAC; 0.25 A/230 VDC |
| Utilisation category | AC-15; DC-13 |
| Short-circuit protection | 2 A gG/gN fuse |
| Positive break travel | 3.5 mm |
| Actuating force | approx. 2 - 3.5 N |
| Ambient temperature | T6: –20 °C … +65 °C, T5: –20 °C … +75 °C |
| Mechanical life | > 1 million operations |
| Ex marking |  II 2G Ex db IIC T6/T5 Gb, II 2D Ex tb IIICT80 °C/T95 °C Db IECEx Ex db IIC T6/T5 Gb, Ex tb IIIC T80 °C/T95 °C Db |
| Approvals | PTB 03 ATEX 1070 X IECEx PTB 06.0098X       |
