Emergency pull-wire switch
ZS 75 S 2Ö/2S VD IP67 -40°C Extreme
Article no.: 1183405 Old article no.: 75430923
contact usProduct features
Cold-resistant down to -40 °C
High degree of protection IP67
Metal enclosure
4 contacts
Wire length up to 2 x 100 m
Release by push button (VD)
Wire pull and breakage detection
Attention: Please state required international approvals with your order!
Notes
At 4 m distance intermediate wire supports are required. Two compensation springs type ZS 73/75 S must be installed, see accessories.
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 60947-5-5, EN ISO 13850, EN ISO 13849-1
Enclosure
aluminium die-cast, powder-coated
Cover
aluminium die-cast, powder-coated
Degree of protection
IP67 (IEC/EN 60529)
B10d (10 % load)
100 000
TM
max. 20 years
Contact material
silver
Switching elements
2 NC/2 NO contacts, type Zb
Switching system
snap action, positive break NC contacts A
Connection
screw connection terminals
Cable cross-section
min. 0.5 mm², max. 2.5 mm² (incl. conductor ferrules)
Stripping length
6 mm
Cable entry
2 x M25 x 1.5
Rated impulse withstand voltage Uimp
6 kV
Rated insulation voltage Ui
400 V
Conventional thermal current Ithe
6 A
Utilisation category
AC-15
Rated operating current/voltage Ie/Ue
6 A/400 VAC
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–40 °C … +70 °C
Mechanical life
> 100 000 operations
Max. wire length
2 x 100 m
Approvals
ß d ]
Weight
1100 g
Downloads
Other interesting products
Emergency pull-wire switch
ZS 75 S 2Ö/2S VD IP67 -40°C ExtremeArticle no.: 1183405 Old article no.: 75430923
contact us
