ZS 75 -40°C Extreme

  • Cold-resistant down to -40 °C
  • Metal enclosure
  • 4 contacts
  • Wire length up to 130 m
  • 2 different spring force variants available
  • Release by push-button (VD)
  • Watertight collar W for protection against penetration of dirt
  • Wire pull and breakage detection
  • Attention: Please state required international approvals with your order!

Technical data

Applied standards EN 60947-5-1, EN 60947-5-5, EN ISO 13850, EN ISO 13849-1
Enclosure aluminium die-cast, powder-coated
Cover aluminium die-cast, powder-coated
Degree of protection IP 65 to IEC/EN 60529
B10d (10 % load) 200 000
TM max. 20 years
Contact material silver
Switching elements 1 NC/1 NO contact, 2 NC/2 NO contacts or 4 NC contacts, type Zb
Switching system snap action, positive break NC contacts
Connection screw connection terminals
Cable cross-section max. 2.5 mm² (incl. conductor ferrules)
Cable entry 2 x M25 x 1.5
Rated impulse withstand voltage Uimp 6 kV
Rated operating isolation voltage Ui 400 V
Conventional thermal current Ithe 6 A
Utilisation category AC-15
Rated operating current/voltage Ie/Ue 6 A/400 VAC
Short-circuit protection 6 A gG/gN fuse
Ambient temperature –40 °C … +70 °C
Mechanical life > 100 000 operations
Max. wire length 130 m
Approvals

Ordering details

Snap action, 2 NC/2 NO contacts

Type   Material no.  
Type    Material no.   
ZS 75 2Ö/2S WVD / 295-390 N -40°C Extreme on request Produced to order.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
Type    Material no.   
ZS 75 2Ö/2S WVD / 120-180 N -40°C Extreme 1189292
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Accessories

Cable Tensioner System TS 65
  • Ordering unit: 1 piece
  • Non-slip
  • Easy to adjust
  • Time-saving
  • Ergonomically designed
  • Injury-free
  • Only one tool
Tensioner M6
  • Ordering unit: 1 piece
  • Adjustable from 145 mm to 225 mm
  • According to DIN 1480
  • For precise adjustment of pull-wire pre-stress
Tensioner M8 stainless steel
  • Ordering unit: 1 piece
  • According to DIN 1480
  • For precise adjustment of pull-wire pre-stress
  • Adjustable from 160 mm to 255 mm
  • Made of stainless steel
Pull-wire Ø 5 mm per metre
  • Steel core Ø 3 mm with red PVC sheath
  • Ordering unit: per metre
  • Total diameter 5 mm
Pull-wire stainless steel Ø 5 mm per metre
  • Ordering unit: per metre
  • Total diameter 5 mm
  • Stainless steel core Ø 3 mm with red PVC sheath
Complete pull-wire set, 5 m
  • Complete pull-wire set consisting of:
    5 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 10 m
  • Complete pull-wire set consisting of:
    10 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 15 m
  • Complete pull-wire set consisting of:
    15 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 20 m
  • Complete pull-wire set consisting of:
    20 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 25 m
  • Complete pull-wire set consisting of:
    25 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 30 m
  • Complete pull-wire set consisting of:
    30 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 40 m
  • Complete pull-wire set consisting of:
    40 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 50 m
  • Complete pull-wire set consisting of:
    50 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Pulley
  • Ordering unit: 1 piece
  • For pull-wire with red PVC sheath Ø 5 mm (steel core Ø 3 mm)
  • To guide the pull-wire where the path is not a straight line
Wire clamp 3 mm
  • Ordering unit: 1 piece
  • For pull-wire with steel core Ø 3 mm
Duplex wire clamp
  • Ordering unit: 1 piece
  • For pull-wire with steel core Ø 3 mm
Egg-shaped wire clamp
  • Ordering unit: 1 piece
  • For pull-wire with steel core Ø 3 mm
Wire thimble RW 4
  • Tip 6 mm open
  • Galvanized
  • For pull-wire with steel core Ø 4 mm
  • According to DIN 65457-35 Z
Eye bolt M8 x 70 with nut
  • Ordering unit: 1 piece
  • 70 mm length referring to eye centre, 25 mm thread length,
    M8 x 1.25 thread
  • According to DIN 444
Eye bolt BM10 x 40 with nut
  • Ordering unit: 1 piece
  • 40 mm length referring to eye centre, 25 mm thread length,
    M10 x 1.5 thread
  • According to DIN 444
Eye bolt open M10 x 120 with 2 nuts
  • Ordering unit: 1 piece
  • Galvanized steel
  • 120 mm length, 70 mm thread length
  • M10 thread
  • 2 hexagon nuts are provided