RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
Applied standards | EN ISO 13849-1, EN 60947-5-1, EN ISO 14119 |
---|---|
Enclosure | aluminium die-cast, powder-coated |
Switch type | type 2 |
Coding level | low coding |
Degree of protection | IP 65 to IEC/EN 60529 |
B10d (10 % load) | 2 million |
TM | max. 20 years |
Contact material | silver |
Switching system | slow action, positive break NC contacts ![]() |
Switching elements | 2 NC contacts, type Zb |
Connection | screw connection terminals |
Cable cross-section | max. 2.5 mm² (incl. conductor ferrules) |
Cable entry | 3 x M20 x 1.5 |
Rated impulse withstand voltage Uimp | 6 kV |
Rated insulation voltage Ui | 400 V |
Conventional thermal current Ithe | 6 A |
Rated operating current/voltage Ie/Ue | 6 A/400 VAC |
Utilisation category | AC-15 |
Short-circuit protection | 6 A gG/gN fuse |
Operation cycles | max. 1800/h |
Positive break travel | 10 mm |
Mechanical life | > 1 million operations |
Ambient temperature | –20 °C … +80 °C |
Approvals | ![]() |
Weight | 332 g |
Positive break travel/angle
Note
Inserted position of actuator = 0 in switching diagram.
The actuator is not included with the switches.
Straight actuator ST 61-B1 | stock type Standard versions, in stock or available at short notice | 1471527 | |
Angled actuator ST 61-B5 | stock type Standard versions, in stock or available at short notice | 1471643 | |