ST 14 S 2Ö - 2m

Safety switch with separate actuator
Material number: 1053988
(Material number old: 14553707)
  • Thermoplastic enclosure
  • Double insulated
  • Version with cable entry on side
  • With pre-wired cable
Note
  • The actuator is not included in the delivery of the switches
Contact

Technical data

Applied standards EN 60947-5-1, EN ISO 13849-1, EN ISO 14119, GS-ET-15
Enclosure thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Switch type type 2
Coding level low coding
Tightening torque enclosure mounting screws: max. 1.5 Nm
Degree of protection IP 67 to IEC/EN 60529
B10d (10 % load) 2 million
TM max. 20 years
Contact material silver
Switching system slow action, positive break NC contacts
Switching elements 2 NC contacts, type Zb
Connection cable 4 x AWG 20 UL 2464
Cable diameter 5.4 mm ±3%
Cable cross-section 4 x 0.56 mm²
Rated impulse withstand voltage Uimp 4 kV
Rated insulation voltage Ui 250 V
Conventional thermal current Ithe 6 A
Rated operating current/voltage Ie/Ue 6 A/250 VAC; 0.25 A/230 VDC;
4 A/24 VDC
Utilisation category AC-15; DC-13
Short-circuit protection 6 A gG/gN fuse
Positive break travel 8 mm
Ambient temperature –20 °C … +75 °C
Mechanical life > 1 million operations
Approvals
Cable length 2 m
Weight 130 g

Contact diagram

Switching diagram

Positive break travel/angle

Note
Inserted position of actuator = 0 in switching diagram.
The actuator is not included with the switches.


Actuators

Type   Material no.  
Type    Material no.   
Straight actuator ST 14-B1 stock type Standard versions, in stock or available at short notice 1040840
Type   Material no.  
Type    Material no.   
Flexible actuator ST 14-B3 stock type Standard versions, in stock or available at short notice 1040842
Type   Material no.  
Type    Material no.   
Angled actuator ST 14-B5 stock type Standard versions, in stock or available at short notice 1040841