GFSI IK 2ÖS D 2Ö VD

Safety foot switch
Material number: on request
  • Without switching impulse when unlocking foot switch;
    NO contact 13-14 is converted into positive break NC contact by internal baffle after pressure point,
    Safety contact: 13-14 , Signalling contact: 21-22
  • Ergonomic pedal design and wide opening in protective shield
  • Wiring compartment
Contact

Technical data

Applied standards EN ISO 13849-1, EN 60947-5-1, GS-ET-15
Enclosure aluminium die-cast, powder-coated
Pedal aluminium die-cast, powder-coated
Protective shield aluminium die-cast, powder-coated
Degree of protection IP 65 to IEC/EN 60529
B10d (10 % load) 200 000
TM max. 20 years
Connection screw connection terminals
Cable cross-section max. 2.5 mm² (incl. conductor ferrules)
Cable entry 1 x M20 x 1.5
Contact material silver
Switching system slow action, positive break NC contacts
Switch insert 2 x EM 232 IK 1Ö/1S-V
Switching elements 2 NO/2 NC contacts
Actuating force pressure point approx. 245 N
Utilisation category AC-15
Rated impulse withstand voltage Uimp 6 kV
Rated operating isolation voltage Ui 500 V
Conditional short-circuit current 1100 A
Conventional thermal current Ithe 6 A
Rated operating current/voltage Ie/Ue 6 A/400 VAC
Contact load capacity max. 400 VAC,
max. 6 A (cos φ = 1)
Short-circuit protection 6 A gG/gN fuse
Ambient temperature –25 °C … +80 °C
Mechanical life > 100 000 operations
Approvals

Contact diagram

Switching diagram