ES 13 WPH-S 2Ö/1S - 5m

Position switch with safety function
Material number: on request
  • Thermoplastic enclosure
  • Double insulated
  • Suitable for in-line mounting
  • With pre-wired cable, cable length 5 m
  • Cable entry on side
  • Actuator: Parallel roller lever with collar WPH
  • Actuating speed max. 0.5 m/s with an actuating angle of 30°
  • Actuation parallel to switch from below
  • Metal roller
  • Watertight collar for protection against penetration of dirt
  • Actuator can be repositioned by 180° on request
  • With plastic roller available on request

Technical data

Applied standardsEN ISO 13849-1; EN 60947-5-1; EN ISO 14119
Switch typetype 1
Coding levelno coding
Enclosureglass-fibre reinforced, shock-proof thermoplastic, self-extinguishing UL 94 V-0
Tightening torqueenclosure mounting screws: max. 5 Nm
Degree of protectionIP 67 to IEC/EN 60529
Contact materialsilver
Switching systemslow action, positive break NC contacts
Switching elements2 NC/1 NO contact, type Zb
Connectioncable 6 x AWG 20
Cable cross-section6 x 0.56 mm²
B10d (10 % load)2 million
TMmax. 20 years
Rated impulse withstand voltage Uimp4 kV
Rated operating isolation voltage Ui250 V
Conventional thermal current Ithe6 A
Rated operating current/voltage Ie/Ue6 A/250 VAC; 0.25 A/230 VDC;
4 A/24 VDC
Utilisation categoryAC-15; DC-13
Short-circuit protection6 A gG/gN fuse
Ambient temperature–20 °C … +75 °C
Mechanical life> 1 million operations
Operation cyclesmax. 1800/h
Repeat accuracy of switching points± 0.1 mm
Contact openingmax. 2 x 3.5 mm

Contact diagram

Switching diagram

Actuating angle

α - Actuating angle from bottom of switch axis as shown in picture