RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
Applied standards | EN 60947-5-2 |
---|---|
Enclosure | stainless steel 1.4305 |
Front cap | POM |
Degree of protection | IP 67 to IEC/EN 60529 |
Connection | cable PVC (Ø max. 3.6 mm), |
Switching elements | 1 NO contact, PNP, 3-wire |
Rated switching distance sn | 2 mm |
Correction factors | Steel (Fe360) = 1; Stainless steel approx. 0.7; Brass approx. 0.5; Aluminium approx. 0.4; Copper approx. 0.4 |
Rated operating voltage range UB | 6 … 30 VDC |
Residual ripple | ≤ 10 % |
Switching current | max. 0.2 A |
Voltage drop at Ie | max. 1.8 V |
Current absorption | < 12 mA at 24 VDC |
Hysteresis | approx. 10 % |
Switching frequency | 2000 Hz |
Repeatability | ≤ 3 % |
Protection circuit | Inductive interference protection, protection against polarity reversal, short-circuit and overload proof |
LED display | lights up yellow on actuation |
Ambient temperature | –25 °C … +85 °C |
With pre-wired cable
IS M8b 2AABCA PNP NO 2m | stock type Standard versions, in stock or available at short notice | 1202076 | |
With plug-in connector
IS M8b 2AABC PNP NO ST1 | stock type Standard versions, in stock or available at short notice | 1202083 | |