IS M18b 8AAAC PNP NO ST2

Inductive sensor
Material number: 1202183
  • Metal enclosure
  • M18 x 1 thread
  • Flush mounting
  • Long life, no mechanical wear
  • Insensitive to soiling
  • With LED
  • With plug-in connector M12 x 1
Note
  • 2 mounting nuts are included in delivery
In stock
Contact

Technical data

Applied standards EN 60947-5-2
Enclosure brass, nickeled
Front cap POM
Degree of protection IP 67 to IEC/EN 60529
Connection Plug-in connector M12 x 1, 4-pole
Switching elements 1 NO contact, PNP, 3-wire
Rated switching distance sn  8 mm
Correction factors Steel (Fe360) = 1; Stainless steel approx. 0.7; Brass approx. 0.5; Aluminium approx. 0.4; Copper approx. 0.4
Rated operating voltage range UB 10 … 30 VDC
Residual ripple ≤ 10 %
Switching current max. 0.2 A
Voltage drop at Ie max. 1.8 V
Current absorption < 15 mA at 24 VDC
Hysteresis approx. 10 %
Switching frequency 400 Hz
Repeatability ≤ 3 %
Protection circuit Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
LED display lights up yellow on actuation
Ambient temperature –25 °C … +85 °C
Weight 57 g

Contact diagram

Flush mounting

Side by side mounting