ZS 75 1Ö/1S W / 120-180 N

Pull-wire switch
Material number: on request
  • Metal enclosure
  • 2 contacts
  • Wire length up to 130 m
  • Adjustable spring force: 120-180 N
  • Wire pull and breakage detection
  • Watertight collar W for protection against penetration of dirt
  • Without mechanical latching
Note
  • At 5 m distance intermediate wire supports are required. One wire thimble is provided.
Contact

Technical data

Applied standards EN ISO 13849-1, EN 60947-5-1
Enclosure aluminium die-cast, powder-coated
Cover aluminium die-cast, powder-coated
Degree of protection IP 65 to IEC/EN 60529
B10d (10 % load) 2 million
TM max. 20 years
Contact material silver
Switching elements 1 NC/1 NO contact
Switching system snap action, positive break NC contacts
Connection screw connection terminals
Cable cross-section max. 2.5 mm² (incl. conductor ferrules)
Cable entry 2 x M25 x 1.5
Rated impulse withstand voltage Uimp 6 kV
Rated insulation voltage Ui 400 V
Conventional thermal current Ithe 6 A
Utilisation category AC-15
Rated operating current/voltage Ie/Ue 6 A/400 VAC
Short-circuit protection 6 A gG/gN fuse
Ambient temperature –25 °C … +70 °C
Mechanical life > 1 million operations
Max. wire length 130 m
Approvals

Contact diagram

Switching diagram


Accessories

Cable Tensioner System TS 65
  • Only one tool
  • Injury-free
  • Ergonomically designed
  • Easy to adjust
  • Non-slip
  • Time-saving
Tensioner M6
  • For precise adjustment of pull-wire pre-stress
  • According to DIN 1480
  • Adjustable from 145 mm to 225 mm
Tensioner M8 stainless steel
  • For precise adjustment of pull-wire pre-stress
  • According to DIN 1480
  • Made of stainless steel
  • Adjustable from 160 mm to 255 mm
Indicator lamp Multi-LED RD 230 VAC
  • Lamp cap red
  • M20 x 1.5
  • 230 VAC
Reduction ring M25x1.5 / M20x1.5
  • For the reduction from M25x1.5 to M20x1.5
Pull-wire Ø 5 mm per metre
  • Steel core Ø 3 mm with red PVC sheath
  • Total diameter 5 mm
Pull-wire stainless steel Ø 5 mm per metre
  • Stainless steel core Ø 3 mm with red PVC sheath
  • Total diameter 5 mm
Complete pull-wire set, 5 m
  • Complete pull-wire set consisting of:
    5 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 10 m
  • Complete pull-wire set consisting of:
    10 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 15 m
  • Complete pull-wire set consisting of:
    15 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 20 m
  • Complete pull-wire set consisting of:
    20 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 25 m
  • Complete pull-wire set consisting of:
    25 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 30 m
  • Complete pull-wire set consisting of:
    30 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 40 m
  • Complete pull-wire set consisting of:
    40 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Complete pull-wire set, 50 m
  • Complete pull-wire set consisting of:
    50 m pull-wire Ø 3 mm with 2 mm PVC sheath,
    2 wire clamps DIN 741,
    1 wire thimble DIN 65457,
    1 eye bolt DIN 444 and
    1 Duplex wire clamp
Pulley stainless steel
  • Roller: polyamide
Wire clamp 3 mm
  • For pull-wire with steel core Ø 3 mm
Duplex wire clamp
  • For pull-wire with steel core Ø 3 mm
Egg-shaped wire clamp
  • For pull-wire with steel core Ø 3 mm
Wire thimble RW 4
  • According to DIN 65457-35 Z
  • For pull-wire with steel core Ø 4 mm
  • Galvanized
  • Tip 6 mm open
Eye bolt M8 x 70 with nut
  • According to DIN 444
  • 70 mm length referring to eye centre, 25 mm thread length,
    M8 x 1.25 thread
Eye bolt BM10 x 40 with nut
  • According to DIN 444
  • 40 mm length referring to eye centre, 25 mm thread length,
    M10 x 1.5 thread