RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
ZS 75 S
- Metal enclosure
- Snap action
- Wire length up to 2 x 100 m
- Wire pull and breakage detection
Technical data
| Applied standards | EN ISO 13849-1, EN 60947-5-1 |
|---|---|
| Enclosure | aluminium die-cast, powder-coated |
| Cover | aluminium die-cast, powder-coated |
| Degree of protection | IP 65 to IEC/EN 60529 |
| B10d (10 % load) | 2 million |
| TM | max. 20 years |
| Contact material | silver |
| Switching elements | 1 NC/1 NO contact, 2 NC/2 NO contacts or 4 NC contacts, type Zb |
| Switching system | snap action, positive break NC contacts  |
| Connection | screw connection terminals |
| Cable cross-section | max. 2.5 mm² (incl. conductor ferrules) |
| Cable entry | 2 x M25 x 1.5 |
| Rated impulse withstand voltage Uimp | 6 kV |
| Rated insulation voltage Ui | 400 V |
| Conventional thermal current Ithe | 6 A |
| Utilisation category | AC-15 |
| Rated operating current/voltage Ie/Ue | 6 A/400 VAC |
| Short-circuit protection | 6 A gG/gN fuse |
| Ambient temperature | –25 °C … +70 °C |
| Mechanical life | > 1 million operations |
| Indicator lamp | as option |
| Max. wire length | 2 x 100 m |
| Approvals |    |
Ordering details
Snap action, 4 NC contacts
| ZS 75 S 4Ö | on request Produced to order. | ||
| If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants. | |||
Accessories
Compensation spring ZS 73/75 S
- With travel limitation
- Adaption of length expansions caused by changes in temperature
- Version consisting of: wire rope with red PVC sheath, 2 carabiner galvanized and tension spring (1.4310)
Cable Tensioner System TS 65
- Only one tool
- Injury-free
- Ergonomically designed
- Easy to adjust
- Non-slip
- Time-saving
Tensioner M6
- For precise adjustment of pull-wire pre-stress
- According to DIN 1480
- Adjustable from 145 mm to 225 mm
Tensioner M8 stainless steel
- For precise adjustment of pull-wire pre-stress
- According to DIN 1480
- Made of stainless steel
- Adjustable from 160 mm to 255 mm
Pull-wire Ø 5 mm per metre
- Steel core Ø 3 mm with red PVC sheath
- Total diameter 5 mm
- Ordering unit: per meter
Pull-wire stainless steel Ø 5 mm per metre
- Stainless steel core Ø 3 mm with red PVC sheath
- Total diameter 5 mm
- Ordering unit: per meter
Complete pull-wire set, 5 m
- Complete pull-wire set consisting of:
5 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 10 m
- Complete pull-wire set consisting of:
10 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 15 m
- Complete pull-wire set consisting of:
15 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 20 m
- Complete pull-wire set consisting of:
20 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 25 m
- Complete pull-wire set consisting of:
25 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 30 m
- Complete pull-wire set consisting of:
30 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 40 m
- Complete pull-wire set consisting of:
40 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 50 m
- Complete pull-wire set consisting of:
50 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Pulley stainless steel
- To guide the pull-wire where the path is not a straight line
- Roller: polyamide
Wire thimble RW 4
- According to DIN 65457-35 Z
- For pull-wire with steel core Ø 4 mm
- Galvanized
- Tip 6 mm open
Eye bolt M8 x 70 with nut
- According to DIN 444
- 70 mm length referring to eye centre, 25 mm thread length,
M8 x 1.25 thread
Eye bolt BM8 x 70 with nut, stainless steel
- According to DIN 444
- 70 mm length referring to eye centre, 25 mm thread length,
M8 x 1.25 thread - Stainless steel
Eye bolt BM10 x 40 with nut
- According to DIN 444
- 40 mm length referring to eye centre, 25 mm thread length,
M10 x 1.5 thread
Eye bolt open M10 x 120 with 2 nuts
- 120 mm length, 70 mm thread length
- M10 thread
- Galvanized steel
- 2 hexagon nuts are provided