ZS 71 1Ö/1S-A / 200 N

Pull-wire switch
Material number: on request
(Material number old: 71141924)
  • Metal enclosure
  • 2 contacts
  • Small design
  • Wire length up to 20 m
  • Spring force variant: 200 N
  • Wire pull and breakage detection
  • Position indicator A
  • Without mechanical latching
Note
  • At 3 m distance intermediate wire supports are required. One wire thimble is provided.
Contact

Technical data

Applied standards EN 60947-5-1, EN ISO 13849-1, GS-ET-15
Enclosure aluminium die-cast, powder-coated
Cover thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Degree of protection IP 65 to IEC/EN 60529
B10d (10 % load) 2 million
TM max. 20 years
Contact material silver
Switching system snap action, positive break NC contacts
Switching elements 1 NC/1 NO contact
Connection screw connection terminals
Cable cross-section max. 2.5 mm² (incl. conductor ferrules)
Cable entry 2 x M20 x 1.5
Rated impulse withstand voltage Uimp 6 kV
Rated operating isolation voltage Ui 400 V
Conventional thermal current Ithe 6 A
Utilisation category AC-15
Rated operating current/voltage Ie/Ue 6 A/400 VAC
Short-circuit protection 6 A gG/gN fuse
Ambient temperature –25 °C … +70 °C
Mechanical life > 1 million operations
Max. wire length 20 m
Approvals