Wireless receiver RF Rx EN868-2W-s-RS232 24 VDC

Wireless receiver
Material number: 1189512
(Material number old: 90590021)
  • EnOcean® wireless technology
  • 2 potential-free relay outputs
  • 2 change-over contacts, max. 6 A
  • RS 232 interface
  • Version with Power-down function
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Notes
  • The current switching status of the device is stored when the power supply is turned off. When the supply voltage returns, the last switching status is restored. When the device is voltage-free, any switching operations are lost. A maximum of 100,000 memory operations are possible.
  • Adapter cable RJ11 on Sub-D 9-pol female 0,5m is included
  • External antenna always required for optimum wireless range
In stock
Contact

Technical data

Applied standardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20, -4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2;
ANSI/EIA/TIA-232-F-1997
Number of channels2
MountingDIN rail mounting
Connectionterminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Degree of protectionIP 20 to IEC/EN 60529
Inputs2 wireless channels, max. 10 transmitters per channel
Outputs2 change-over contacts (relays),
RS 232 interface
Rated operating current/voltage Ie/Uemax. 0.1 A/24 VDC -15 % … +10 %;
max. 0.25 A/24 VAC -15 % … +10 %;
output contacts: 6 A/250 VAC; 2 A/24 VDC
Utilisation categoryAC-15; DC-13
Rated operating isolation voltage Ui250 VAC
Rated impulse withstand voltage Uimp2.5 kV
Frequency868.3 MHz (EU, Switzerland)
Displaygreen LED: operating state,
orange LEDs: switching conditions and baud rate setting
Operation cyclesapprox. 9000 telegrams with repetitions/h
Degree of pollution2
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
Interface
Baudrate9600 Bd … 57600 Bd
Data bits8
Stop bit1
ParityNone
Flow controlNone
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Wireless approvalsEU: RED 2014/53/EU
Weight164 g