Wireless universal transmitter
RF I/O
Thermoplastic enclosure
sWave® wireless technology (SW868/SW915/SW917/SW922)
No wiring and pipe laying required
Power supply by Lithium battery
Easy programming of receiver
Output signal can be individually configured at the receiver
Available with "LBT - Listen before Talk" software (necessary in conjunction with potential interference)
The RF I/O may be used in combination with wireless inductive sensor RF IS or wireless magnetic sensor RF RC M10
Connection of external switching contact (potentialfree contact) with gold contacts possible.
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
ABS
Degree of protection
IP67 (IEC/EN 60529)
Voltage source
lithium battery (replaceable)
Connection
4 x plug-in connector M12 x 1, 4-pole
Connectable devices
RF IS M8, RF IS M12, RF IS M18, RF IS M30, RF RC M10, external switches using the connecting cable 1215497
Ambient temperature
–20 °C … +65 °C
Switching frequency
max. 5 Hz
Standby current
60 µA
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Actuating time
min. 80 ms
Note
status signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
delivery state: jumper position without status signal
transmission of battery voltage and switching condition
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
Downloads
Variants / Options
The following variants / options are available on request:
- LBT - Listen before Talk software (necessary in conjunction with potential interference)
