RF I/O
Features/Options
- Thermoplastic enclosure
- sWave® wireless technology (SW868/SW915/SW922)
- No wiring and pipe laying required
- Power supply by Lithium battery
- Easy programming of receiver
- Output signal can be individually configurated at the receiver
Notes
- The RF I/O may be used in combination with wireless inductive sensor RF IS
- Connection of external switching contact (potentialfree contact) with gold contacts possible.
- Delivery does not include protective caps.
Technical data
| Enclosure | ABS |
|---|---|
| Connection | 4 x Plug-in connector M12 x 1, 4-pole |
| Degree of protection | IP 67 to IEC/EN 60529 |
| Protocol | sWave® |
| Ambient temperature | –20 °C … +65 °C |
| Operation cycles | approx. 12000 telegrams at repetitions/h |
| Switching frequency | max. 5 Hz |
| Standby current | 60 µA |
| Voltage supply | Lithium battery Tadiran SL-760; system Li/SOCl2; (replaceable) |
| Nominal voltage | 3.6 V |
| Capacity | 2.2 Ah |
| Frequency | 868.3 MHz or 915 MHz (USA, Canada, Mexico and Australia) or 916.5 MHz (Japan) |
| Data rate | 66 kbps |
| Wireless range | SW868/915: max. 450 m outside, max. 40 m inside SW922: max. 150 m outside, max. 20 m inside |
| Battery life | depending on the switching frequency and number and type of sensors for 1000 transfers/day and one inductive sensor approx. 300 days; for 1000 transfers/day and one mechanical switch approx. 1400 days |
| Actuating time | min. 80 ms |
| Note | Status signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s Delivery state: jumper position without status signal Transmission of battery voltage and switching condition |
Products by Wireless technology
sWave® 868 MHz (Europe)
sWave® 915 MHz (USA, Canada, Mexico and Australia)
sWave® 922 MHz (Japan)
