RF I/O SW922 Vcc extern


  • Thermoplastic enclosure
  • sWave® wireless technology
  • 4 connectors: for the use with wireless sensors, series RF, 3-wire PNP sensors 24 VDC and/or external NO contacts with gold contacts
  • No wiring and pipe laying required
  • External power supply via M12 female plug-in connector
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
  • Delivery does not include protective caps.

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -3,
EN 61000-4-2, -20, -4, -5, -6;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureABS (Acrylnitril-Butadien-Styrol)
ConnectionSensors: plug-in connector 4 x M12 x 1, 4-pole
power supply: 1 x M12 female plug-in connector
Degree of protectionIP 67 to IEC/EN 60529
Ambient temperature–20 °C … +65 °C
Operation cyclesmax. 1440 telegrams/h
Switching frequencymax. 5 Hz
Rated operating voltage range UB18 - 30 VDC Pin 1 and Pin 3 connector M12
Rated operating isolation voltage Ui75 VDC
Uimp500 V
Rated operating current Ie2.5 mA
Voltage drop Ue Ua- 3.5 V with 4 x 50 mA sensor current
Max. load current per sensor connection50 mA
Switching point E1 - E4> 5 VDC
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth400 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Actuating timemin. 80 ms
Approvals Japan: ARIB STD-T108: 204-610002
Notestatus signal: individually adjustable via jumper, no, 10 s, 100 s, 1000 s, 10 000 s
Ordering details
Type   Material no.
RF I/O SW922-4E-Vcc-ext on request Produced to order.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
Type   Material no.
RF magnet antenna SMA plug-in connector straight 2.5 m stock type Standard versions, in stock or available at short notice 1186143
Type   Material no.
RF magnet antenna 5db SMA plug-in connector straight 1.5 m stock type Standard versions, in stock or available at short notice 1188958