KF 3
Features/Options
- 3-pedal type
- Thermoplastic enclosure with metal base plate
- Max. 2 contacts per pedal
- Wiring compartment
- Reed contacts for low currents from 1 mA to 1 A
- Micro switches for current load up to 5 A
- Available with Hall sensor: Analogue output signal proportional to pedal travel
- Available with pre-wired cable or plug-in connector, other contact combinations on request
Product image
Technical data
| Standards | EN 60947-5-1; VDE 0660 part 200 |
|---|---|
| Enclosure | polyamide 66 glass-fibre reinforced, self-extinguishing |
| Base plate | aluminium, enamel finish |
| Pedal | glass-fibre reinforced thermoplastic |
| Connection | wiring compartment, cable gland M12 x 1.5 with spiral top |
| Cable section | max. AWG 20: 0.52 mm², cable: ø max. 6.5 mm |
| Degree of protection | IP 65 to IEC/EN 60529 |
| Switching system | reed contacts or |
| Switching voltage | 12 … 250 VAC/DC |
| Max. switch-on current | Reed contacts: 1 A, Micro switch: 5 A |
| Max. switch-on power | Reed contacts: 30 VA, Micro switch: 1250 VA |
| Max. fuse rating | Micro switch: 5 A gG/gN fuse |
| Ambient temperature | –10 °C … +60 °C |
| Mechanical life | > 1 million operations |
| Approvals |   |
