Wireless receiver RF Rx SW868-4S 24 VDC - SET

Wireless receivers and repeaters
Material number: 1373201
In stock

Features/Options

  • sWave® wireless technology
  • 4 potential-free relay outputs
  • 4 NO contacts, max. 3 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Note

Product image

 

Dimensions

Downloads

» Data sheet
PDF | 22.04.2018

» Mounting and wiring instructions
PDF | 2 MB | 07.06.2017

» STEP-File
ZIP | 1 MB | 20.03.2017

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20, -4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Number of channels4
MountingDIN rail mounting
Connectionscrew terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
Degree of protectionIP 20 to IEC/EN 60529
Inputs4 wireless channels, max. 40 transmitters
Outputs4 NO contacts (relay)
Rated operating current Ie24 VDC: max. 0.1 A
Rated operating voltage Ue24 VDC -15 % … +10 %
Ie/Ue of output contacts3 A / 250 VAC; 3 A / 24 VDC
Utilisation categoryAC-15; DC-13
Ui250 VAC
Uimp2.5 kV
Frequency868.3 MHz
Displaygreen LED: operating state,
orange LED: switching conditions
Operation cyclesapprox. 12000 telegrams at repetitions/h
Degree of pollution2 to IEC/EN 60664-1
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
External antennaalways required for optimum wireless range
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry. Switching contacts are not suitable for capacitive loads.

Arrangement of receiver and switch antenna

Optimum    Possible       Unsuitable

mounting    mounting     mounting


Note

Magnetic base antennae must be mounted on a
metal plate of min. 250 x 250 mm size.